55×34 mm Detection Area — Counts Objects Down to 1 mm, IP67
The ACS 100 is a frame type counting sensor designed for reliably counting freely-falling small objects. The transmitter and receiver are integrated into a single housing — no separate alignment is required, making installation straightforward. With a 55×34 mm detection area and a 1 mm minimum detectable object size, it suits high-speed packaging, pharmaceutical, and agricultural counting applications.
1 mm minimum object size - counts seeds, tablets, small parts and more
Single-housing design - transmitter and receiver aligned from factory, no setup required
4 kHz switching frequency - handles high-speed production lines without missing counts
Adjustable contact time - 0.1 ms to 2 s selectable at order to match your controller
IP67 rated - fully protected against dust and water immersion
Works on metal and non-metal parts - 940 nm optical thru-beam principle
| Detection Type | Thru-beam (transmitter-receiver) |
| Wavelength | 940 nm |
| Sensing Area | 55×34 mm |
| Min. Detectable Object | 1 mm |
| Beam Separation | 2 mm |
| Output | PNP switching |
| Supply Voltage | 10–30 VDC |
| Current Consumption | <75 mA |
| Switching Frequency | 4 kHz max. |
| IP Rating | IP67 |
| Operating Temperature | −40°C to +60°C |
| Dimensions (W×H×D) | 101×47.8×13 mm |
| Material | Plastic and stainless steel |
| Response Time (1–2 mm objects) | 1 ms |
| Response Time (>2 mm objects) | 0.33 ms |
| Contact Capacity | ≤200 mA |
| Contact Time | 20 ms standard; 0.1 ms–2 s selectable |
| Off Delay | 0–5 s |
| Initialization Time | 0.3 s |
| Short Circuit Protection | Yes |
| Reverse Polarity Protection | Yes |
| Ambient Light Resistance | 5,000 lx (avoid direct sunlight) |
| Electrical Connection | 3×0.14 mm² PUR cable |
101 mm × 47.8 mm × 13 mm
Contact us for the full technical drawing (PDF)
Get a quote or ask about custom contact time and cable options.